help #2

Thread Tools
 
Search this Thread
 
Old Nov 6, 1999 | 06:10 PM
  #1  
Joe Styles's Avatar
Thread Starter
|
Senior Member
Joined: Jun 1999
Posts: 360
Likes: 0
From: Fort Lauderdale.Fl.
Post help #2

Installed mine today, how do you know when it is clean, I mean what are you supposed to see silver,gold etc; can you scrape the contacts hard, I took it out three times.
Can I mess up my computer or something.
I live in ft.lauderdale fl. maybe I will take off a day and drive up there it is a three hour ride.
JOE


------------------
1999XLT,Supercab,Gold,5.4Styleside,Flowmaster#70 Series Catback,Rockford Fosgate 400a4 Amp.MTX-5000 Dual Eight's Sub.
Uniden Radar Detector,
Black Tinted Window's, Super Chip!
*************************
[HAVE FUN]

 
Reply
Old Nov 6, 1999 | 06:29 PM
  #2  
spaceace's Avatar
Senior Member
Joined: May 1999
Posts: 259
Likes: 0
From: Spring City, PA
Post

Two things I found when cleaning.

There will be a white haze on the contacts when using the green scrubby. When it is clean the haze is gone.

When installing the chip, remove it. There will be two very thin etched lines on each contact. I have good eyes, you might need something to see it better.

------------------
1999 F250 SD CC, LWB, 5.4L, Auto, 3.73, 4x4, Power TT mirrors w/ marker lights, White, Full Tint, PendaPro SR, Flowmaster Delta 40 series, K&N filtercharger, Superchip(Airbox removed for a second try, maybe in the winter it will be advantagous?)

 
Reply
Old Nov 6, 1999 | 06:39 PM
  #3  
Dunbarton's Avatar
Senior Member
Joined: Nov 1998
Posts: 626
Likes: 0
From: New Jersey
Post

Joe,

If your truck started after installing your SuperChip, it's fine. It will either start or it won't.

------------------
Dunbarton "The Middle Aged Kid" '99 XLT SC SB 4x2 4.6 auto 3.55 ls The occasional Z-71 Eater! Wedgewood & Denim, SuperChipped, Airaid FIPK, Rhino Liner, Mobil 1. Man, I got it all! (New Jersey)

 
Reply
Old Nov 6, 1999 | 07:10 PM
  #4  
Joe Styles's Avatar
Thread Starter
|
Senior Member
Joined: Jun 1999
Posts: 360
Likes: 0
From: Fort Lauderdale.Fl.
Post

I installed the chip when I first got it on tuesday, it started up fine it did not feel any different so I waited until today to clean it a little better.When I put it back it did not fire up I hope I did not over do it scraping the contact's.
JOE

------------------
1999XLT,Supercab,Gold,5.4Styleside,Flowmaster#70 Series Catback,Rockford Fosgate 400a4 Amp.MTX-5000 Dual Eight's Sub.
Uniden Radar Detector,
Black Tinted Window's, Super Chip!
*************************
[HAVE FUN]

 
Reply
Old Nov 10, 1999 | 12:44 AM
  #5  
Superchips_Distributor's Avatar
Former Sponsor
Joined: Mar 1998
Posts: 13,385
Likes: 4
From: Virginia
Post

Dear Joe,

As we spoke about, Superchips can usually get a damaged contact working again, in most cases. It's great that you're close enough to drive up to Superchips, you'll get a chance to see the place. They are *extremely* busy right now, as it's just after the annual SEMA trade show, so it's best to call and make an appointment with them.

Good luck, and let me know if I can be of assistance,

------------------
Mike Troyer
Performance Products, Inc.
National Distributor of Superchips
(540) 862-9515
Email: mtroyer@compuserve.com

 
Reply




All times are GMT -4. The time now is 07:26 AM.