Re-adhering pin striping that is coming off
Thread Starter
|
Member
Joined: Feb 2002
Posts: 59
Likes: 0
From: Elkton, MD 21921
Re-adhering pin striping that is coming off
I've got some pin striping (about 3/4" wide) that is in good shape, but peeling off at the edges (where the door meets the fender and rear quarter panel). What can I use to re-adhere this? Silicone caulk? Super glue?
thanks,
-Mark
thanks,
-Mark
Senior Member
Joined: Mar 2001
Posts: 244
Likes: 0
From: Sac, CA
Sup Kook,
A good friend of mine does striping and moldings.
He ALWAYS applies clear finger nail polish to the ends to keep them from doing what your experiencing.
The inexpensive kind works well as it does not turn yellowish after time.
Hope this helps…
Late
A good friend of mine does striping and moldings.
He ALWAYS applies clear finger nail polish to the ends to keep them from doing what your experiencing.
The inexpensive kind works well as it does not turn yellowish after time.
Hope this helps…
Late
Thread Starter
|
Member
Joined: Feb 2002
Posts: 59
Likes: 0
From: Elkton, MD 21921
Originally posted by Nodrive55
Sup Kook,
A good friend of mine does striping and moldings.
He ALWAYS applies clear finger nail polish to the ends to keep them from doing what your experiencing.
The inexpensive kind works well as it does not turn yellowish after time.
Hope this helps…
Late
Sup Kook,
A good friend of mine does striping and moldings.
He ALWAYS applies clear finger nail polish to the ends to keep them from doing what your experiencing.
The inexpensive kind works well as it does not turn yellowish after time.
Hope this helps…
Late