Program New FOB
Thread Starter
|
Member
Joined: Nov 2001
Posts: 51
Likes: 0
From: Northern NJ
Program New FOB
Programing Remote
OK I just got another remote door lock key fob, now I am having trouble programing it for my truck. I was able to program the new fob - but now my old one wont work.
Heres the technique I used,
cycle ignition on/off 8 times within 10 seconds then press the lock button on the remote which you want to program.
The problem I am having it with programing 2 remotes !!
Any help is appreciated
Thanks
OK I just got another remote door lock key fob, now I am having trouble programing it for my truck. I was able to program the new fob - but now my old one wont work.
Heres the technique I used,
cycle ignition on/off 8 times within 10 seconds then press the lock button on the remote which you want to program.
The problem I am having it with programing 2 remotes !!
Any help is appreciated
Thanks
Senior Member
Joined: Aug 2000
Posts: 243
Likes: 0
From: Palm Beach County, FL
F250L,
It sounds like you only programed one of them.
You must program all of them at the same time (up to 4 fobs).
Press one button on each fob within 20 seconds of the procedure you described.
Page 89 of my Y2K F150 owners manual.
XLT_D
It sounds like you only programed one of them.
You must program all of them at the same time (up to 4 fobs).
Press one button on each fob within 20 seconds of the procedure you described.
Page 89 of my Y2K F150 owners manual.
XLT_D