I was getting ready to order some products for spring and was wondering which would be better for very light swirl removal Poorboy's SSR1 or Megs 205? Are these comparable or are they completely different in their corrective abilities? Thanks.

 

meg's 205 will work great. recommend using a DA if poosible, they say you can applie by hand though

 

I have both SSR 1 and M205 and have used both - but on different vehicles. That said, I don't have hands on experience with one against the other. I would tend to think the SSR 1 is a little less aggressive though - which would make it a good product to start with. (Always start with the least aggressive product first.)

 

I'll be doing the truck with a LC green pad and Optimum Poli Seal tomorrow. I have swirls so we'll see how it goes. I know by hand I could get rid of some so with the above mentioned combo I'm hoping this will take care of all the swirls.

 

3M hand Glaze- absolutely the best

 

Depends on your definition of light swirls. If you post some pics I think the members will be able to help you better.

 

I actually use the poorboys stuff. I have 2 bottles that I use together. One is purple and I think is SSR2 and then the Pink SSR1.

Take out the deep swirls and then remove the light ones.

 

He said remove, not hide.