Mud in Foglight...HELP
Thread Starter
|
Junior Member
Joined: Apr 2005
Posts: 7
Likes: 0
From: Orlando
Mud in Foglight...HELP
My foglights quit working awhile back so I finally decided to see why. Well, both lights were slap full of mud. I washed the mud out the best that I can but cant get it all off of the inside lense. I just cant reach in there with anything. Any suggestions?
Matt
Matt
Moderator &
Senior Member
Senior Member
Joined: Jan 2002
Posts: 31,440
Likes: 4
From: The Bluegrass State
Remove the entire assembly and wash it out in the sink...
On my last truck, I had both of them off of my truck and full of water to try to determine where they were leaking... once located, I hit it with silicone sealant, dried them out the best I could with a towel on a stick (pencil), and then used a hair drier to finish the task. Allow them to sit overnight before reinstalling so that any tiny amount would be allowed to evaporate...
-RP-
On my last truck, I had both of them off of my truck and full of water to try to determine where they were leaking... once located, I hit it with silicone sealant, dried them out the best I could with a towel on a stick (pencil), and then used a hair drier to finish the task. Allow them to sit overnight before reinstalling so that any tiny amount would be allowed to evaporate...
-RP-