F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   Care & Detailing (https://www.f150online.com/forums/care-detailing-22/)
-   -   can't get my tailgate open (https://www.f150online.com/forums/care-detailing/127676-cant-get-my-tailgate-open.html)

f-150_91 Sep 5, 2003 10:49 PM

can't get my tailgate open
 
I have a 98 Ranger, I also recently installed a rail system tonneu from Autozone. It's not a low profile tonneau but it just sits on top of the bed and it's held down by 6 clamps, 3 on each side of the bed. My problem is I can't open my tailgate, not unless I really give tailgate a good yankin' like I want to rip it off or something, lol I got it open once when I just finished my tonneau and was testing it out. I went to haul some junk to the local dump but I couldn't get my tailgate to open. Do I have to roll it up and then open the tailgate, sounds silly???? Any way I can prevent my tailgate from getting stuck onto the tonneau????:help: :help: :confused:

Smithy Sep 6, 2003 07:09 AM

What brand of tonneau do you have? Snaps or not?

Peacemaker Sep 6, 2003 09:43 AM

Maybe the back end of the tonneau is getting caught on the top of the tailgate. I had the same problem when I first bought mine. "Try unloosening the tonneau with the 6 clamps, and move it just a little more towards the cab." I have the ame setup as you, with the 6 clamp design. "Just make sure the very back of the tonneau is barely touching the top of the tailgate and you should be alright." Hope this helps! :thumbsup:

97 XLT 4X4,4.2L Sep 6, 2003 10:37 AM

My father has a Ranger and this happens to him all the time. It is probably that back rail being too snug on top of the tail gate. Check that out first, it is probably your problem. Good luck with it.

f-150_91 Sep 6, 2003 10:29 PM

Thanks guys,

Smithy, I have a Lebra vinyl Tonneau from Autozone.

Peacemaker, I"ll try that and get back with you to see how it went. Tks again,,,,,91

sk8inrj1 Sep 7, 2003 04:13 PM


Originally posted by Peacemaker
"Try unloosening the tonneau with the 6 clamps, and move it just a little more towards the cab."
Sounds like Peacemaker is correct, but I think people would understand "loosening or tightening" better.



"unloosening"...hehe :devil:

Peacemaker Sep 7, 2003 07:10 PM

Alright now. Quit making fun of my hillbilly accent.:D

91,

I've got the same tonneau, but it's for a fullsize.:thumbsup:

lifeguardjoe Sep 7, 2003 09:55 PM

you dont use "unloosen"?? freak...:fyi:

flafonman Sep 8, 2003 09:07 AM

Oooooooooooo. A putdown from etymologist and master speller lifeguardjoe.

Peacemaker Sep 9, 2003 05:08 PM

What is an etymologist???:confused:

flafonman Sep 10, 2003 10:42 AM

Etymology is the study of word origins and usage, including earliest recorded occurrence; and should not be mistaken with Entomology (Study of Insects) or Enzymology (Study of Enzymes and Proteins).

I'll put you down for a "Word A Day" desk calendar for Christmas.

;)

lifeguardjoe Sep 10, 2003 12:14 PM


Originally posted by flafonman
Oooooooooooo. A putdown from etymologist and master speller lifeguardjoe.

LMFAO!!!:devil: :thumbsup:

Peacemaker Sep 10, 2003 03:34 PM


Originally posted by flafonman
Etymology is the study of word origins and usage, including earliest recorded occurrence; and should not be mistaken with Entomology (Study of Insects) or Enzymology (Study of Enzymes and Proteins).

I'll put you down for a "Word A Day" desk calendar for Christmas.

;)

Golly gee wiz. :D Thanks??? :devil:

flafonman Sep 10, 2003 04:04 PM

You'll thank me when your robust vocabulary skills cause nubile co-eds to bypass less erudite individuals in favor of your suave and debonair persona.

:fyi: Until the calendar gets there, that means:"You'll get some from hot college chicks because you seem smarter than the other guys."

Raoul Sep 10, 2003 04:21 PM

uhhh...according to my Word desk calendar he just said you were a fat, wordy person attracting persons from the Sudan due to your being gay and carefree while in public.

...and something about volcanic matter.

(I'd slap him just to be safe)


All times are GMT -4. The time now is 01:34 AM.


© 2026 MH Sub I, LLC dba Internet Brands