Question I have a 2010 f150 xlt 5.4 moter I put all new brake pads rotors and calibers on it all seemed to work fine foe a couple weeks now all of a sudden it seems the drivers side seems to hang up but not all the time it happened to me twice then it seems ok what would be doin this

 

Could be the flexible hoses need replacing. The collapse on the inside sometimes.

 

If you replace one side, also do the other side.

 

I did both sides I'm thinking it's the hoses

 

That's what I meant, change the hoses on both sides.

 

Hey guys I have a 2010 f150 I put new front brake hoses on when I bleed the brakes I have good pedal but when I start the truck the pedal goes to floor I have bled the brakes 4 or 5 times already and get steady fluid but still have no pedal am I'm missing something

 

You will need to get a scanner that will allow you to do an ABS bleed to get all of the air out.

I also recommend a pressure bleeder too.

 

Also here's what 3 year old brake fluid looks like as I just flushed the brakes on my other truck: