Line-X install 1-2-3
Thread Starter
|
Member
Joined: Oct 2001
Posts: 61
Likes: 0
From: Alexandria, VA
Line-X install 1-2-3
Today I had the bed of the truck done by Line-X Effects of Springfield, Virginia and I thought that I would take some time to show you how they did my truck and also the care that was taken before and during the installation. So, if you're interested, look at the "Body" section at:
https://www.f150online.com/galleries...y.cfm?gnum=529
I've documented the entire process there.
I'd also recommend that anyone in the metro DC area that is considering a Line-X application to give Chris Harris and his staff at Line-X Effects consideration. They can be contacted at 703-339-2100. I'm VERY pleased with results and the workmanship. They did an excellent job and did it in less than 2 hours.
They were also kind enough to allow me to take the pictures as the did the work. And no, I didn't get a shot of them applying the Line-X, but then again, I would have had to have been in the booth and I wasn't going to risk getting Line-X on my camera! The stuff cures within seconds of being shot and that would have been bad news...
https://www.f150online.com/galleries...y.cfm?gnum=529
I've documented the entire process there.
I'd also recommend that anyone in the metro DC area that is considering a Line-X application to give Chris Harris and his staff at Line-X Effects consideration. They can be contacted at 703-339-2100. I'm VERY pleased with results and the workmanship. They did an excellent job and did it in less than 2 hours.
They were also kind enough to allow me to take the pictures as the did the work. And no, I didn't get a shot of them applying the Line-X, but then again, I would have had to have been in the booth and I wasn't going to risk getting Line-X on my camera! The stuff cures within seconds of being shot and that would have been bad news...
Last edited by Rapier; Jan 21, 2002 at 04:25 PM.
