2010 super cab SB stake holes?
Thread Starter
|
Junior Member
Joined: Feb 2010
Posts: 7
Likes: 0
From: Austin, TX
2010 super cab SB stake holes?
Just bought my 1st F150. Its a 2010 supercrew 5.5 bed. The rail caps don't have stake pocket holes. Dealer tells me the SB does not have stake pockets but looking at the bed it appears ther are wells where the stake pocket would be.
Can anyone tell me whether there are stake pockets in the SB or not? If not what if anything are folks using for bully type top rings?
Can anyone tell me whether there are stake pockets in the SB or not? If not what if anything are folks using for bully type top rings?
Thread Starter
|
Junior Member
Joined: Feb 2010
Posts: 7
Likes: 0
From: Austin, TX
Well,
I think I have found my own answer on another F150 users forum. Appears the stake holes are in the bed but the side rails just dont have the pop outs.
http://www.fordf150.net/photos/showp...hp/photo/30899
I think I have found my own answer on another F150 users forum. Appears the stake holes are in the bed but the side rails just dont have the pop outs.
http://www.fordf150.net/photos/showp...hp/photo/30899
Senior Member
Joined: May 2009
Posts: 617
Likes: 0
From: Milwaukee, Wisconsin
First off, get a new dealer.
Second, All of the F150 beds have stack pockets. You do have to cut the square hole in the rail caps though. There should be molded lines to show where you need to cut.
Second, All of the F150 beds have stack pockets. You do have to cut the square hole in the rail caps though. There should be molded lines to show where you need to cut.
