1997-2003 Aftermarket Headlight Options
sweet post, but just wondering if the halo fog lights for the 97-03 f150 are worth it or if anybody has them and some pics of them installed on their truck so i can at least see what they look like before i go out and buy them?
just makin sure they will be bright enough
thanks and again sweet post!!
just makin sure they will be bright enough
thanks and again sweet post!!
Just thought I would add these...its what I have on my truck. I like the looks of the smoked lens and the output is great after I adjusted them about 6 times...The only problem was being careful because the heads came in a black housing that I believe is for the early 97's made in 96. After I got them out of that housing it was easy.
http://www.ebay.com/itm/390344922546...84.m1497.l2649

http://www.ebay.com/itm/390344922546...84.m1497.l2649
Pre July 96 Headlights
Is anyone aware of a manufacturer of aftermarket headlights (Euro, etc) for a pre July 96 F150? I checked the forum and I apologize if I missed a previous discussion. From what we've seen the housing does not does not allow for 97-03 headlights to fit. Any ideas?
The headlights in my post with the pic a couple up had the housing for those made in 96...I had to remove it to put my lights in....I can tell you that the lights without the housing should be able to be put in the stock housing though because once i took my aftermarket lights out of the housing they fit perfectly in my truck...
Awesome thread Raptor05121! After reading some of your material I think I've decided to go with the lightening style with the black housing and matching signals. Thanks for the info Raptor05121, as someone already mentioned, tail lights would be awesome as well. When you get time that is
.
NickGlass, I'm with you on wanting more info about the fog lights. The halo/projectors look sweet, but would like some input from users before purchasing.
97Fordman150, truck looks awesome man!
I can't wait to get mine ordered and installed so I can post some pics of it. It'll be a while though.
.NickGlass, I'm with you on wanting more info about the fog lights. The halo/projectors look sweet, but would like some input from users before purchasing.
97Fordman150, truck looks awesome man!
I can't wait to get mine ordered and installed so I can post some pics of it. It'll be a while though.
Dont buy halo foglights
Awesome thread Raptor05121! After reading some of your material I think I've decided to go with the lightening style with the black housing and matching signals. Thanks for the info Raptor05121, as someone already mentioned, tail lights would be awesome as well. When you get time that is
.
NickGlass, I'm with you on wanting more info about the fog lights. The halo/projectors look sweet, but would like some input from users before purchasing.
97Fordman150, truck looks awesome man!
I can't wait to get mine ordered and installed so I can post some pics of it. It'll be a while though.
.NickGlass, I'm with you on wanting more info about the fog lights. The halo/projectors look sweet, but would like some input from users before purchasing.
97Fordman150, truck looks awesome man!
I can't wait to get mine ordered and installed so I can post some pics of it. It'll be a while though.
Last edited by Johnnyford98; Apr 9, 2012 at 03:59 AM.
I too wish I saw this earlier! I just got whacked in my 04' heritage and lost the front-driver's side. $6k damage.
When I got out and looked, my left Xenarc x2010 was destroyed. I knew I would never get a replacement this many years later. What is sad is that the electronics and bulbs are fine (believe it or not), but the reflector and lens are smashed. I wish I could just get a replacement assembly and put my electronics in it. If someone knows of somewhere, that would be a lifesaver.
I ended up buying these:

Which, while look nice, don't perform as well as I expected. The beam patterns (high and low) aren't very good. I really miss my xenarcs!!!
When I got out and looked, my left Xenarc x2010 was destroyed. I knew I would never get a replacement this many years later. What is sad is that the electronics and bulbs are fine (believe it or not), but the reflector and lens are smashed. I wish I could just get a replacement assembly and put my electronics in it. If someone knows of somewhere, that would be a lifesaver. I ended up buying these:

Which, while look nice, don't perform as well as I expected. The beam patterns (high and low) aren't very good. I really miss my xenarcs!!!
I have heard nothing but bad things from people i know who have bought the halo type aftermarket fog lights they dont fit right at all into the factory holes.I think your best bet is to go with the aftermarket depo brand fog lights like i bought,they fit like factory but look really modern.You can see a picture of them on my profile pictures so you can see what they actually look like and they are really nice,I havnt put them in yet but i held one in and it fits perfect and my truck only came with the black plugs but the wiring harness is there so they are simple plug and play with no wiring or fitting to do at all.



Yessir masta, Imma get right on that'a masta
