How To Add Ford Ambient Lighting
#17
very nice....but I think FORD is WAY overpriced for their product.
I have blue LED's under my front dash, and LED's under my front seats to light up the rear seating area. ($7.99 per flex strip)
And the LED's that ford has can be purchased for about $4.00 a piece. With wiring you could do the same thing yourself for under $50 from Oznium.com, another option from people thinking of doing LED lighting.
Rear Seat
and LED dome lights:
I have blue LED's under my front dash, and LED's under my front seats to light up the rear seating area. ($7.99 per flex strip)
And the LED's that ford has can be purchased for about $4.00 a piece. With wiring you could do the same thing yourself for under $50 from Oznium.com, another option from people thinking of doing LED lighting.
Rear Seat
and LED dome lights:
#19
You might think you could do it for under $50 bucks but remember you have the option from 7 different colors with the push of a button. The option in the post above is only blue......to do more than 1 color you would need a controller and the one at Oznium.com is $150 bucks to start with. By the time your done you would have spent the same amount if not more.
#21
You might think you could do it for under $50 bucks but remember you have the option from 7 different colors with the push of a button. The option in the post above is only blue......to do more than 1 color you would need a controller and the one at Oznium.com is $150 bucks to start with. By the time your done you would have spent the same amount if not more.
Or just use a PWM controller
http://www.electro-tech-online.com/e...-leds-car.html
#22
#23
#24
#26
#27
No it's not. But if you Look at the second picture, just right of the silver screw is a wire in loom that goes into the back of (P R N D 2 1). Twist to remove, then replace burnt out bulb.
#28
#29
sorry for the cell phone pic but those big green circles are autometer nv's showin oil pressure on the right and oil temp on the left theyre in roush vent pods and the best part they still allow for air to come out around the gauge so you still retain all HVAC functions the edge matches up in color in real life but the pic makes it look teelish