Ok Everyone, Here is the deal...i just bought some 7-Color Indiglo gauges...i have the white backing installed, but for the life of me i can't make heads or tails of the instructions concerning hooking up the electrical side of the darn thing... ANY help would be great, PLEASE...i'm totally stumped here. I do have a little knowledge of electrical...so i have that plus....BTW this is going in a 97' F150 w/ tach...ANY HELP WOULD BE GREAT...thanks!

 

i think all you need is a ground and the positive wire going to your dash lights ,right ...?

 

I ended up hooking up the hot and ground to the my deck. I couldn't find anything behind the dash that set off the my multimeter enough...but its all cool...thanks Roush

 

Did you happen to buy your indiglo on Ebay? I did about three weeks ago and have yet to recieve them. Once you found the correct wires how did they look? or did they even work i have never bought on Ebay before so I am kinda concerened about how they will look and work. Hope all went well for you let me know. Thanks

 

I tapped the power wire into the brown wire on the back of the headlight switch, so they come on with the parking lights. The ground goes down to the small bolts under the fuse box, it's almost like those bolts are there for grounding,,,,98


http://www.f150world.com/showownerpi...&n=13801&pos=2