if you want to do Ptm bumpers id say tint em , but if your leaving the bumpers chrome, id say leave the tail lights too , looks good as is

 

As mentioned in an earlier post, some look really bad if it isn't done right. I spent a couple of hours just wet sanding all the blemishes and the tint after it dried until it was nice and even all around.....then about 5 layers of clearcoat for a super clear look.

 

i say tint them very little just a few coats or harley tails

 

I say do 1-2 coats of NS, to darken them just enough to get a "dark cherry" look.

This is my guess as to what 2 coats of NS would look like. Got the tail from my dad's truck, which has 2 coats, then slightly corrected the brightness, since his truck was in the shade when I took the picture of his truck, then put it on top of yours. You could start with one coat, and see how dark it it, then go from there.


Also, I randomly PTMed the mirror cap (or tried to ). Yes, I'm a little bored...