xentec HID kit
anyone else had a problem with HID4U? i ordered my kit last thursday and i still havent gotten them. the receipt i got from paypal has Xentec as the selling and not HID4U. anyone else get this too?
Originally Posted by NoLongerJeepin
email the seller and see what kit he is selling
yes they do you can also use a 9005 bulb it will fit right in
yes they do you can also use a 9005 bulb it will fit right in
Originally Posted by NoLongerJeepin
yea he emailed me in a day or 2. have yall tried sending him a message over ebay?
Last edited by Jditta; Feb 12, 2008 at 05:38 PM.
it took HID4U 4days to answer me by e-mail when he sent me the wrong kit, which i got in about 4days, and did get a tracking number through postal service, have to send the other back.....and when your search for him on ebay, do an advanced search and search by seller
Last edited by planedoc76; Feb 12, 2008 at 06:48 PM.
I didn't have a problem getting my kit, but it doesn't look plug and play though. It doesn't have an H13 plug to connect my headlights to... its just has three wires: black, white and blue
Information from another thread said this was the correct way to hook it up:
Black-Orange
White-Orange/green
Blue-green/black
Anybody? I thought these were all PnP?
Information from another thread said this was the correct way to hook it up:
Black-Orange
White-Orange/green
Blue-green/black
Anybody? I thought these were all PnP?
Originally Posted by Melovidov21
I didn't have a problem getting my kit, but it doesn't look plug and play though. It doesn't have an H13 plug to connect my headlights to... its just has three wires: black, white and blue
Information from another thread said this was the correct way to hook it up:
Black-Orange
White-Orange/green
Blue-green/black
Anybody? I thought these were all PnP?
Information from another thread said this was the correct way to hook it up:
Black-Orange
White-Orange/green
Blue-green/black
Anybody? I thought these were all PnP?
The wire schematic for the 2004+ is in the 2004 forum somewhere... You *will* have to splice wires (which I simply refused to do). The second kit I had came with a plug to insert the wires necessary into a H13 setup...
Wire color post (for 2005)... not sure about others but, likely the same from 2004 to 2008.
https://www.f150online.com/forums/sh...10&postcount=3
https://www.f150online.com/forums/sh...10&postcount=3
I looked at 'pushing' the pins from my kit into the stock plug and really couldn't figure out a good way to do it... I mean, you obviously want it water tight and it obviously wasn't plug and play...
Good luck going whichever route you decide. Maybe you got the wrong kit?
Good luck going whichever route you decide. Maybe you got the wrong kit?


