First Time Posting Topic!
Thread Starter
|
Junior Member
Joined: May 2001
Posts: 4
Likes: 0
From: Mira Loma, CA
First Time Posting Topic!
Hey everyone, i have been reading this message board for a while now, and i have finally registered. I was wondering, what makes the early 97 and the late 97 to current corners so different,exaclty . Also is it just the corners or is the headlight assembly different too. and is there anything else that is different. If by any chance anybody has pictures or knows where there are pictures of the difference, that would be great too. Thanx for your help and you'll probably hear from me a lot in the future.
Senior Member
Joined: Jul 2000
Posts: 5,116
Likes: 3
From: Houston, by way of every major city in America.
Welcome to the boards!! 97LARIAT18!!
The late 97 and up attach with a single screw. This screw is visible as you look straight down
at the top of the corner light,under the hood. The corners slide in on a set of rails,and pop into the mount with two peg style clips. The screw then holds the asembly solidly in place. If yours doesn't mount this way,then you probably have the early style. I have only seen the later style mount,so I don't know what the earlier style looks like. Hope this helps,,,,,98
Careful on the mods,it gets addicting rather quickly
------------------
98 F-150 4.6 Litre XLT2wd Ext. cab
Yokahama AVS/ST's,,too noisy
prarie tan/tan int.
K/N gen.II fipk
custom dual exh/gibson rectangle tips/rear exiting.
color matched snuglid
Superchip!!!
Clear front corners
Speedglo gauges w/carbon fiber overlay,might paint it black
Stillen Quad light air dam,with Pilot PL-240 driving lights
Euro taillights
Cobra 75WXST cb w/weather alert
Kenwood cd w/Radio Shack speakers,and Soundstream P203e amplifier//Single 10" sub
Viper alarm
On the waywheels,tires,Proglass shaker hood,new leather seat
Come see my new pictures@ www.my-f150.com
officialtomwaits.com
reverendhortonheat.com
WOW,what a cool site!
FENDER GUITARS ROCK!!!
I just "wish" it was lowered
The late 97 and up attach with a single screw. This screw is visible as you look straight down
at the top of the corner light,under the hood. The corners slide in on a set of rails,and pop into the mount with two peg style clips. The screw then holds the asembly solidly in place. If yours doesn't mount this way,then you probably have the early style. I have only seen the later style mount,so I don't know what the earlier style looks like. Hope this helps,,,,,98
Careful on the mods,it gets addicting rather quickly
------------------
98 F-150 4.6 Litre XLT2wd Ext. cab
Yokahama AVS/ST's,,too noisy
prarie tan/tan int.
K/N gen.II fipk
custom dual exh/gibson rectangle tips/rear exiting.
color matched snuglid
Superchip!!!
Clear front corners
Speedglo gauges w/carbon fiber overlay,might paint it black
Stillen Quad light air dam,with Pilot PL-240 driving lights
Euro taillights
Cobra 75WXST cb w/weather alert
Kenwood cd w/Radio Shack speakers,and Soundstream P203e amplifier//Single 10" sub
Viper alarm
On the waywheels,tires,Proglass shaker hood,new leather seat
Come see my new pictures@ www.my-f150.com
officialtomwaits.com
reverendhortonheat.com
WOW,what a cool site!
FENDER GUITARS ROCK!!!
I just "wish" it was lowered
