Ok i want to add 4 more 100 watt KC daylighters. I bought 4 used lights really cheap, but it cam with no wiring and i want to wiring the set together.I know i am going to need a higher guage wire and i know each light pulls 8.3 amps. My question is how exactly do i wire the set together?. I know alot about elecrical system, but i can't firgue it out in my head. any info will be apprecated.

------------------
97 f-150 XL 4.2L V6 standerd cab short bed 5 speed
-3 1/2 fabtech lift kit
-3 inch fabtech spindles
-Rancho RS9000 shocks
-Heckethorn Rough Country Steering Stabilizer
-16X9 centerline trigons
-285/75R16 BFG's A/Ts
-Betterbuilt Black nerf bars
-GSP Black brush Guard
-Stockland tonneau cover
-Line-X Bedliner
-Bedrug Carpet Bed liner
-Euro corners
-Euro taillights
-Shaved tailgate
-Upper and lower billet grilles with a 4X4 bumper
-Doulbe limo tint and 20% on windsheild
-Eclipse 5504 HU with Audio control 4.1 EQ PPI power class 4100 amp and MB quart seperates
-One 12 Eclipse 88120 aliumium subwoofer
-spilt 60/40 seat(came with a bench seat)
-Carpet(came with vinyl)
-Leather Wraped Steering wheel(from a junked F-150 lariet)
-Superchip
-K&N filter
-0ptima yellow top battery
-Steeda front sway bar
-Stinger terminals wire etc.
-PIAA 520 Ion fog lights
-PIAA super white blubs
-4 KC 100 watt lights
-Straight Exhaust with gibson stanless tip
-Billet dash trim
-Billet antenna
-Billet pedels
-Billet door stills
-Billet mirror
-Billet shift ****
-Royal Purple oil,trans,rear end and coolant
-Auidovox APS750 Alarm with keyless entry.

 

two relays, each pulling seperate wire from the battery. Then splice together the switch wires from the relays, so one switch controls two relays.

------------------

Matt Adams
Littleton, CO
1994 Ford Explorer, highly modified ( http://mattadams.f150online.net )
2000 F-150 XLT Supercab
5.4L Triton V8 Engine, Automatic Transmission, 3" dual exhaust, Rhino lining, K&N Filtercharger Intake Performance Kit (FIPK), JL Audio stealthbox with Phoenix gold amplifier, premium stereo
Genuine Steel brush guard with 4 PIAA 520's mounted on it, PIAA Airdam with PIAA 520 fog's and PIAA 510 superwhite driving lights in it.
off-road and tow packages
and much much more!
Grizzly Roll bar (double bar/single bar) with 5 PIAA 80 XT's mounted on it (3 driving, 2 fogs)
Storage box in the back
Soon to come:
Pistol mod (convenient, easily accessible yet somewhat hidden access).
Custom paint job?

 

Thanks i was thinking of that, but my head is all screwed up right now. eek!

------------------
97 f-150 XL 4.2L V6 standerd cab short bed 5 speed
-3 1/2 fabtech lift kit
-3 inch fabtech spindles
-Rancho RS9000 shocks
-Heckethorn Rough Country Steering Stabilizer
-16X9 centerline trigons
-285/75R16 BFG's A/Ts
-Betterbuilt Black nerf bars
-GSP Black brush Guard
-Stockland tonneau cover
-Line-X Bedliner
-Bedrug Carpet Bed liner
-Euro corners
-Euro taillights
-Shaved tailgate
-Upper and lower billet grilles with a 4X4 bumper
-Doulbe limo tint and 20% on windsheild
-Eclipse 5504 HU with Audio control 4.1 EQ PPI power class 4100 amp and MB quart seperates
-One 12 Eclipse 88120 aliumium subwoofer
-spilt 60/40 seat(came with a bench seat)
-Carpet(came with vinyl)
-Leather Wraped Steering wheel(from a junked F-150 lariet)
-Superchip
-K&N filter
-0ptima yellow top battery
-Steeda front sway bar
-Stinger terminals wire etc.
-PIAA 520 Ion fog lights
-PIAA super white blubs
-4 KC 100 watt lights
-Straight Exhaust with gibson stanless tip
-Billet dash trim
-Billet antenna
-Billet pedels
-Billet door stills
-Billet mirror
-Billet shift ****
-Royal Purple oil,trans,rear end and coolant
-Auidovox APS750 Alarm with keyless entry.