NR Auto White/Black Gauge Install
Thread Starter
|
Senior Member
Joined: Nov 2000
Posts: 979
Likes: 0
From: Tampa Bay Area - FL
NR Auto White/Black Gauge Install
I just bought some of these. How hard are they to install? Should I just take them somewhere? I don't want to screw it up. I put indiglos in my Accord and had to replace the speedo ($14), but no biggie. Anyone in the Tampa Bay area know where I can trust to do this, and how much they would charge me?
------------------
--Lariat4WD--
2000 Ford F-150 Extended Cab Flareside 4x4 Lariat
5.4L;auto;3.55LS;Black/Silver;ORP;remote keyless;floor-shift 4wd;Class III;AM/FM/SingleCD
Mods so far:
Lund X-Terminator bug shield; Vent Shade Vent Visors; Westin Black step bars; Pendaliner bedliner; GSP black Safari Grille Guard; GTS TailBlazerII Slotted taillight covers; Clear corner lenses; under hitch backup lights; 2 KC Hilites Daylighter 6" 150W black round; Cranked torsion bars; Removed lower striping; Replaced factory ORP decals w/ silver; 2 Polk Audio EX10 10" subs under rear seat; Sony XM754HX amp; Viper 300ESP alarm
Pending
2001 Lightning taillights; White/black gauges; Replacing factory gold/maroon Lariat decals & upper stripes with silver & black
Warranty Paint Work
Entire bed possibly being repainted due to primer showing; also painting roof and passenger door due to factory defects; Changing all silver 2-tone to black
Wish list:
More lights; Flowmaster 40 Series SI/DO exhaust; Optima red top battery; Remote starter & Prox. sensor; In-dash TV/CD/DVD/AM/FM head unit; BedRug & Soft Tonneau cover or Roll bar (not sure yet); Aluminum dash kit; Build house w/ huge garage.
Please Visit My Web Site (Updated Daily)
------------------
--Lariat4WD--
2000 Ford F-150 Extended Cab Flareside 4x4 Lariat
5.4L;auto;3.55LS;Black/Silver;ORP;remote keyless;floor-shift 4wd;Class III;AM/FM/SingleCD
Mods so far:
Lund X-Terminator bug shield; Vent Shade Vent Visors; Westin Black step bars; Pendaliner bedliner; GSP black Safari Grille Guard; GTS TailBlazerII Slotted taillight covers; Clear corner lenses; under hitch backup lights; 2 KC Hilites Daylighter 6" 150W black round; Cranked torsion bars; Removed lower striping; Replaced factory ORP decals w/ silver; 2 Polk Audio EX10 10" subs under rear seat; Sony XM754HX amp; Viper 300ESP alarm
Pending
2001 Lightning taillights; White/black gauges; Replacing factory gold/maroon Lariat decals & upper stripes with silver & black
Warranty Paint Work
Entire bed possibly being repainted due to primer showing; also painting roof and passenger door due to factory defects; Changing all silver 2-tone to black
Wish list:
More lights; Flowmaster 40 Series SI/DO exhaust; Optima red top battery; Remote starter & Prox. sensor; In-dash TV/CD/DVD/AM/FM head unit; BedRug & Soft Tonneau cover or Roll bar (not sure yet); Aluminum dash kit; Build house w/ huge garage.
Please Visit My Web Site (Updated Daily)
Senior Member
Joined: Jun 2000
Posts: 1,167
Likes: 0
From: Anchorage
Lariat,
I just put mine in a few weeks back. I got mine from Roger at the Online Store. It's not as complicated as it seems. The only pain is getting the headlight switch unit out of the dash.
Here's a suggestion, do this when the truck is normal operating temperature and use your digital camera to take pics of the position of the needles. After putting in the new overlay, turn on the truck and while idling, insert the needles in the correct position.
Good luck.
I just put mine in a few weeks back. I got mine from Roger at the Online Store. It's not as complicated as it seems. The only pain is getting the headlight switch unit out of the dash.
Here's a suggestion, do this when the truck is normal operating temperature and use your digital camera to take pics of the position of the needles. After putting in the new overlay, turn on the truck and while idling, insert the needles in the correct position.
Good luck.