Can anyone tell me the relative size (inches X inches), and the correct placement from some reference point on the back of the truck (like the rear light, top of bed rail, etc.) that the rear quarter panel 4X4 Off Road decals are placed on the "Off Road" package model truck. I am considering a set of decals similar to these to dress up the truck and want to place them in the same general area as they are on this model.

TIA Phil

------------------
97 F-150 SC Lariat, White over gold, 4.6L (Windsor) automatic, 3.55 rear end, electronic 4X4, w/ every option of Lariat and ORP packages except the 17" wheels and the 4X4 decals, MOD so far= K&N air box mod, Gibson Super Truck, clear Bugflector II, Leer TSC 600 hard cover, Bridgestone Dueler OWL ATP 265/75 R-16's, TrailMaster VVS shocks, Smittybilt step bars, "White-white" head lamps.

 

Which truck type do you have? This makes a big difference where the decals goes. Flareside & style side have different size decals & the placement also is different.I have a Flareside ORP. Which style is your truck?????I can help if your truck is a flareside.E-mail me TerryLariat1@aol.com

------------------
RED/SILVER LARIAT SC. FLARESIDE 4X4 ORP,TOW PACK.,A.R.E FG.BEDCOVER,3.55LS,4.6L,AUTO,SPLITFIRE PLATINUM 3 SPARKPLUGS,K&NAIRFILTER/MOD. FACTORY AIRBOX,DUEL EX./20IN.CHROME TIPS,AVS WINDOW SHADES, DOOR SILLS &TAILLITE SLOTS,GTS CABRON FIBER HEADLITE COVERS,FORD 2 PIECE BRA, TINTED WINDONS, PENDALINDER TAILGATE INNER COVER, FORD TOTAL SECURITY SYSTEM/MOTION ALARM,FOGLITE ON WITH BRITES ON,FORD #1TRUCK UNDER GLASS ON FRONT LIC. PLATE,A/TS GOODYEAR TIRES,PERM.+FICTION DISC BRAKE PADS,OWENS FG. STEP BOARDS,55WATT BACKUP LITES, PILOT 55WATT ADD ON BACK UP LITES, <A HREF="http://www.angelfire.com/in2/lariat1/images/LARIAT1F150RED.jpg
" TARGET=_blank>http://www.angelfire.com/in2/lariat1/images/LARIAT1F150RED.jpg
</A>

 

You know I forgot to put that in there didn't I. Its the styleside. Thanks but please let me know how they did the flairside for reference anyway as these will not be the stock ones. See what I am looking at at http://www.soaringeagle.cc/extreme.htm

[This message has been edited by cphilip (edited 10-20-1999).]

 

Make sure you put the driver's side one on a little ****-eyed, the back end slightly lower than the front end. Otherwise you won't have the authentic "applied at the factory" look and everyone will know you cheated.

------------------
Ben Mc.----'99 XLT 5.4 SC SB ORP Dk. Red/Dk. Grey----Fact. Cab Steps/Tonneau/Slider----Straight Duals, Superchip, Airaid/KN (non-sag), Ungo Autostart/Keyless Remote, Prime Designs Air/Bug Deflector, Weathertech Wind/Rain Deflecters----PPI 4240 Amp,McIntosh 6x9's w/crossovers front, Polk DB 5.25's rear---Tuessssdayyyy Affffternoooooon----gotta love it!

 

Your kidding! Are they on ****eyed on purpose? Well, I think I will try for perfection but again these will be custom ones not the stock. Don't want to be a cheater just that no decal was available on the Lariat upgraded one in 97 and I did not like the 17" wheel design then either so I left that last detail off at the time. I still would like to place them in that location as it looks right that way. Still need dimensions so it will look balanced. I don't want too big or too small. It looks balanced to me on the stock so I want to get that size in these custom ones. Russ has upgraded the site with prices. Check it out at http://www.soaringeagle.cc/extreme.htm

[This message has been edited by cphilip (edited 10-21-1999).]