Pin outs?

Thread Tools
 
Search this Thread
 
  #1  
Old 12-06-2001 | 12:20 PM
CCarrara's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 235
Likes: 0
From: Long Island, NY
Question Pin outs?

You guys have the pin outs for the Screw Premium sound system harness?

I have 2 connectors going into the head, one is square and the other is rectangular.

Thanks in advance!!
 
  #2  
Old 12-07-2001 | 12:51 PM
CCarrara's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 235
Likes: 0
From: Long Island, NY
Question

^^Bump


Knowbody has pinouts?? I've tried the InstallDr site, but they don't seem to have the new 02 models listed....

Help!!
 
  #3  
Old 12-07-2001 | 02:19 PM
rtroha's Avatar
Senior Member
Joined: Aug 2000
Posts: 665
Likes: 0
From: Mentor, Ohio, USA
Thumbs up Check the dealer.

If you live close to a dealer, just ask the service guy to see the electrical diagrams. That's what I did when I was installing my amp and had to tie into the rear speaker wires. My dealer even offered to make a copy of the schematic for me. Good luck.

Bob
 
  #4  
Old 12-11-2001 | 11:20 AM
CCarrara's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2001
Posts: 235
Likes: 0
From: Long Island, NY
Thumbs up

Ok, here is the deal:

You can get wire harness plugs AND stock head (or CD6 or Mach MP3) plut to pigtails from Parts Express for the 2002 F-15- SuperCrew. Below are the part numbers. I'll post the pinouts after I install in few minutes to make sure they are correct. Holy smokes, what I had to go though to find this crap out. This industry thinks this is rocket science and knowbody wants to give any info (including Ford and Visteon). Amazing, as if I couldn't figure it out with a meter?? Whats up with that?


Metra (manufacturer) Part #'s:
- Male (plugs into trucks harness): 70-1771
- Female (plugs into stock head): 71-1771

Parts Express ordering Part #'s:
- Male: 265-610 $10
- Female: 265-653 $12

So, with these two items, you can plug directly into trucks harness and plug directly into "stock" head unit (or Visteon's MP3 or CD6 player) and have all the speaker level outs, remote on, ground, dimmer..... wires to splice on to and have a ball.
 



Quick Reply: Pin outs?



All times are GMT -4. The time now is 07:00 PM.