My amp blows fuses
Thread Starter
|
Junior Member
Joined: Feb 2019
Posts: 1
Likes: 0
My amp blows fuses
I have two 10” mtx thunder 4500 and a 760w pioneer 2 channel Bridgeable, and 10 gauge power wire and when I turn the volume high I blow the fuse under the hood. Any suggestions?
Senior Member
Joined: Aug 2007
Posts: 1,867
Likes: 9
First off the power wire should of been a 8 gauge and a main fuse of 60 amps. That amp is asking alot of a 10 gauge wire.
Depending on how long the wire run is it may need to be bumped to a 6 or 4 gauge.
https://www.the12volt.com/wiring/rec...nd-cable-specs
Depending on how long the wire run is it may need to be bumped to a 6 or 4 gauge.
https://www.the12volt.com/wiring/rec...nd-cable-specs
Last edited by 01 gt f150; Feb 24, 2019 at 12:37 AM.