Could someone please post a picture (or contact me to send an email) of the PCM connector from the Ford Electrical Manual for a 1998 f150 w/ 4.6L. At the end of section 24, there should be an image of the PCM connector with pin numbers and locations. Below the image is a chart showing what each pin is for. It may be 2 or 3 pages.

I have a 1997 truck w/a 4.6L, but my wiring/pcm pinout does NOT match what is in the 1997 Ford Electrical manual. I'm guessing it may be a "later in the year" model and match the 1998.

Thanks!

 

Anyone???

 

Just got a chance to pull it off the DVD.

 

Excellent!

Not to be a pest, but can you post the following pages that show pins 36-104 / circuit / circuit function? Pins 1-35 are shown under the connector image, but pins 36-104 are shown on the following 1 or 2 pages.

Thanks again!

 

The DVD is not a pdf version of the paper, does not work that way.

When I select show connector C174 from cell 24, that is the only image that shows, the remainder of the pins are not in the JPEG.

What are you looking for on the PCM ?
That might be able to get the info you need ( pin & color code ) from the specific cell.

 

There are two 1997 MY pinouts. One is an early build before 6-24-96 and the other is after that date..
I cannot upload the pics for some reason. Send me a PM with your email and I will send you the pics.

 

Never mind, I went to Photo Bucket..







Regards

Jean Marc Chartier

 

Thanks JMC, helps to have the paper copy.

My MAR-2002 DVD does not give the remainder of the connector for some reason, no matter what cell I go to. Also, there is no note of the build date on the DVD ( notice this to my 2001 EVTM also ).

 

I had to resort to my 1997 paper manuals because the 97 CD is corrupt and I cannot find the replacement files. The only reason that I remembered the build date differences on the 97 is that I had the manuals a few months before the truck was delivered. I used to sleep with them.....

Regards

Jean Marc Chartier

 

Thanks a bunch guys!! Jean, thanks to your post I remember when I bought my 97 manual there was a second manual that covered the 250 as well...guess I should've bought that one!! I am going to now.

Thanks again guys...BIG help

Randy