Hello all. I am looking to pick up some BFG KO2 35x12.5x18 in the next month. I have a stock 2015 XLT 4x4 with 265x70x17 on it. What lift/level would I need to do, and would any wheel that is 18x9 or 18x10 work with the correct bolt pattern?

 

The BFG's run a little shorter so a 2" level will give you the height, the most important factor whether they rub or not will be the backspace and width of rim.

 

Ok. Thanks for the info.

I was thinking getting some FOX 2.0 to get the space i need. Would a 4 inch spacer work for not rubbing. Also, by width of rim, what would suffice.

Appreciate the feedback/answers, I tried researching this online and there is little to no info other than personal feedback.