New old guy
Thread Starter
|
Junior Member
Joined: Mar 2016
Posts: 1
Likes: 0
New old guy
Hi guys. Being new to the site I hope to pick up some useful advice and tips from some other do-it-yourselfers.
I recently purchased a 2012 Ford F150 4x4 XLT with about 80,000 miles on it. I notice a leak at the thermostat end of the upper radiator hose. The parts list shows an O ring washer in the fitting at that end but there was not one in there. I purchase one and in putting in place I am unable to compress the washer by hand strength to be able to install the spring clip retainer. Is there a tool used to compress the fitting and install the spring clip retainer?
I recently purchased a 2012 Ford F150 4x4 XLT with about 80,000 miles on it. I notice a leak at the thermostat end of the upper radiator hose. The parts list shows an O ring washer in the fitting at that end but there was not one in there. I purchase one and in putting in place I am unable to compress the washer by hand strength to be able to install the spring clip retainer. Is there a tool used to compress the fitting and install the spring clip retainer?
Member
Joined: Jul 1999
Posts: 81
Likes: 0
From: Florida
Judging the book by it's cover
And here I was thinking you were referring to someone like me, who hasn't been on the site for quite a while.....and now all of the names are new and I guess I am too.
As for the thermostat, see if this video gives you any insight. Pertinent info starts at about 3:30.
As for the thermostat, see if this video gives you any insight. Pertinent info starts at about 3:30.