2011 f150 driver window problems
Thread Starter
|
Senior Member
Joined: Aug 2008
Posts: 162
Likes: 0
From: WNY
The wire in the harness inside the truck somewhere. The door harness was fine and replaced it anyways in case I was missing something. But the wire which is the battery power wire runs from the fuse panel/bcm behind the right kick panel into the harness to the driver door some where in the truck harness it is broken or what ever it is.
Member
Joined: Aug 2005
Posts: 39
Likes: 3
From: Arizona
I ended up with same issue. Power wire from fuse block to window motor bad. Didn't want to spend hours tracing bad wire, so ran a new wire off a 12v lead to window motor. I did add a inline 30amp fuse on wire to be safe. I found 12v switched by drivers kick panel so just tapped wire there and added inline fuse and ran with all the other wires going into drivers door.
Junior Member
Joined: Feb 2020
Posts: 1
Likes: 0
bad wire !
2011 f150 fx4 5.0 supercab front driver window quit on me. The other three work fine. Don't think its the switch's cause I swapped them with my fathers truck and no fix grabbed a new window regulator tried plugging it in before installing and nothing. Checked the fuse and its good.. Any ideas guys ?
Junior Member
Joined: Aug 2020
Posts: 1
Likes: 0
2011 f250 window buzzing noise
[QUOTE=F150redFx4;5098630]Well through an extensive amount of headaches sweat and resistance testing with help from some friends narrowed it down to a bad battery positive wire in the main truck harness. Which I cannot afford time or money to tear out or pay some one to tear out and go through. So I found where the wire is at the harness in the cab by the door and the other and at the plug for the BCM and I fished a new wire and spliced it in. So now the window works and amazingly so does everything else. Hopefully I'll have more money in the near future to fix it right but for the time being it will do. Please help me w this problem