Been searching around, and not finding what I need.

Im looking to swap a 36 gallon tank into my 2010 SCREW and ditch the 26 gallon tank, mainly for some extra towing mileage. There is a local scrap yard that has a 2009 4x4 SCREW with the 5.5 foot bed, so I know it will fit, however, I dont want to go through the process of pulling a tank and getting it home only to find it wont work.

Has anyone done this, is it worth the hassle, and has it been documented to work? I found a few discussions talking about doing this with the EB truck, but the fueling system is completely different. I havent found anyone who has done it on a 5.4L based truck.

 

Ive Done It To My Friends 2010 Ford F-150, This Is Where I Got It From
http://www.f150forum.com/f38/26-36-g...ite-up-149731/

 

I live in a rural No. Calif. where gas is $4.15+, but just over the border in Ore. it's $3.59+. I'm loving that big tank. The only problem is that the guage goes haywire on hills when you get down to ~100 mi. on the guage, especially downhill. Saves me ~$15 each tank. When pulling a trailer, it is doubly welcome. In my case it wouldn't take long before it pays for the change.

 

Is there a link for this for an 04-08 or is it the same setup?

 

Same Setup, The Wiring is different of course but its all the same, ill try to find a link, im actually looking to do a custom fuel tank mod since im extending my 5.5Ft Styleside Into a 6.5Ft Flareside So Ill Have More room but im probably gonna go with 38 or maybe 40 gallons but I gotta lose some weight cause im adding so much that my truck is almost past a 1/2 Ton pickup, I might convert to aluminum parts, Okay I need to stop cause im just goin on from a fuel tank to upgrading MY truck

 

heres the link of parts you'll need- https://www.f150online.com/forums/ot...-7-gallon.html

 

thank you