I need to change the rear turn signal bulb and i took out the 2 screws that you see when you open your tailgate but the housing won't budge at all. I've taken back my bedbug on the sides and don't see any other screws to loosen. Am I missing something on this ? Please don't laugh to hard!!!! thanks

 

Just yank rearward on the lens. There's only those two screws but the housing is wedged in there pretty good.

 

^^ What he said I've had mine off 2 times, and both times had to yank very hard.

 

I thnk it has two friction tabs on the front edge. It just wiggles and pulls straight back. Be careful not to scratch the paint when it breaks free all of the sudden.