Official 2009 - 2014 F-150 Picture/Video thread
#441
Exhaust Q’s
Hello, I’m new to this and I just bought a 2009 F-150 and I’m wanting to put a new exhaust tip and I was wondering what size the stock exhaust is and what size the inlet I would need. Thanks
#442
#444
New to the forum
I bought my 2014 FX2 a year and a half ago.
I started tinkering with it pretty quickly. I swapped the grille and emblems to the Tremor ones. I wanted it to look as if it came from the factory as a low number special edition. I added F150 Harley wheels and HID lights. I tinted the mirror reflectors to tone them down
I painted the bumper pads to match the truck and built a lower grille
I lowered the truck with a Belltech kit, added a 3" Magnaflow side exit exhaust and the same calper covers from a Shelby F150
The front emblem was painted black to blend in better
I added a rear camera and painted the emblem to match the truck
I added a Raptor steering wheel, stainless steel trim and pedals. I originally painted the plain jane silver dash trim and center console metallic gray.I removed the cloth seat fabric and reupholstered them, the console lid, and bezel above speedo with a charcoal leather
I changed my mind on the metallic gray and repainted it a matte metallic black.
Recently I added a Boss 302 manifold and a 85mm BBK throttle body (which i filed, sanded and polished). I got a pair of chrome Ford Racing coil covers to match the polishing I've been doing. I used the heater hoses from a GT350 to clean up the look.
I sanded the Roush cat smooth and painted it a metellic black
The interior of the cai intake was painted a red metal flake that pops in the light.
I spent over a week sanding, polishing and clear coating the engine block, A/C lines, and brake master cylinder
I still have a few more things to do before I'm done though
The following users liked this post:
#447
The following users liked this post:
#448
The following users liked this post:
#449
The following users liked this post: