Just a 2" spacer in front.
I still have just under 1/2" of rake.
Yes I installed it myself.I picked up a deep 30mm socket when I installed the leveling kit on my 06 so I had all of the tools. It's not hard, just a matter of having all of the tools needed.The only difference was I needed a bottle jack to get the strut back in on my 11 but didn't need a bottle jack on my 06.

Thanks That was my first mod. I did it as soon as I got it home the day I took delivery. I ordered it and got it in 34 days.

 

Autospring kit from ebay

 

I'm in a state of installing mine now, what is the method with the bottle jack? I have one but not sure where I need to leverage it on. Can you elaborate?

thanks

 

In the instructions from Autospring it says to place the small bottle jack between the lower control arm and a solid spot on the upper strut tower.

 

ahh ok. My kit is a barely used 2" readylift so I didn't get that memo! thanks.

 

Hey, here is a link to a previous thread I showed my pics.

https://www.f150online.com/forums/20...-ecoboost.html

No problems at all with the level kit. I have the 2" up front and blocks in the back (AutoSpring). It sits dead level with my trailer (28ft) hooked up and a box full of camping gear.

Great truck

 

So, I finally got my 2011 Fx4 Red Candy Screw. Leveled, with AAL and 305/65/r18 BFG A/T's. A little disappointed though. My 08 had the same set up and had a great stance to it. The 11' still sits low up front and I have the same type of leveling kit. But overall I love the truck!

 

That looks great man.

 

Thank You

 

You think a leveling kit on stock 20" Pirelli's would look odd?

 

Yes, they look odd without a level.

 

What kit do you have in yours?

 

Looks stock to me!

 

2" Autospring.

It's not leveled in the last pic with the Pirellis. It's leveled in the other pics with 34's.

 

2" Autospring in front and rear stock height.