has it been done?
so i know out of the gate the better solution is to just buy what i want but it if i go that route its a different platform and a lot more money in the end. so............
has anyone successfully converted a 2wd to 4x4? i know the majority of parts i need but still curious if im looking down an untraveled road. Big questions are so far, 1 is the 4x4 frame the same unlike the previous gen 2 is the wiring harness there just tucked up somewhere for the t case? |
I assume at a minimum the frame is different for transmission crossmember and front differential
|
Are you planning to go IFS or SAS? that and the tranny mount would be different.
|
If I'm gonna go with it I want to ifs and keep it a stock setup. Need to get ahold of a 4c4 and pull some measurements
|
I think your best bet would be buying a salvage vehicle as a donor, maybe a Tbone total? Then you'd have all the parts you need, and move your body onto the donor chassis
|
No idea 'cause I just bought a 4x4 to start with... :)
Good luck! Mitch |
Originally Posted by MitchF150
No idea 'cause I just bought a 4x4 to start with... :)
Good luck! Mitch |
Originally Posted by Patman
I think your best bet would be buying a salvage vehicle as a donor, maybe a Tbone total? Then you'd have all the parts you need, and move your body onto the donor chassis
|
Originally Posted by vroom_vroom
(Post 5235384)
This was pretty much my thought. Need to pull some measurements from a 4x4 truck to start and see if the frame is the same.
|
All times are GMT -4. The time now is 02:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands