Hi everyone. I have been working the power fold mirror mod that has been posted on here many times and have mostly had success with this. I have 2 issues.

First, my 04 wiring to newly updated 07+ switch must be different. It successfully folds and unfolds the mirrors. BUT the controls for the mirror movement itself are backwards. I push switch left and mirror goes right, up is down, etc. Does anyone know the wiring differences from 04 to 07 ?

Second, the new mirror came with puddle lights. I found the wire to the dome lights to tap into. But when hooked up to the mirror, the puddle is very dim. Not sure if dim because of low voltage or bad ground etc. Any ideas on this part also?

Thanks in advance to anyone's input !