Hey everyone gonna pick up an 06 f150 xlt super cab tomorrow. White 4x4. I want to pick up the KMD SD series monster wheels and some 35" tires. I plan on also adding a 2.5" leveling lift from rough country. I want to be able to fit 35s and not have to worry about rubbing. What size wheels should I get 20x9? Or do I need to go bigger for 35's? Any opinions and advice appreciated.

 

Preferably some BFG tires and also wanna do tints and intake soon

 

20x9 will be fine. The offset is what you are going to have to worry about to run 35's. I would think with just about any offset and 35's with only a level that you are likely to have some kind of rubbing. A negative offset is likely to rub plastic, which you can trim. A positive offset (depending on the width of the tire) may rub the UCA, which you obviously can't trim. Hopefully someone with a similar setup can chime in on what offset worked best for them.

 

Also, while you are waiting on replies, search the forum for people running 35's with a level and see what offset their wheels are.

 

Yeah I was thinking I may need to do a 4 in lift for 35's but Idk

 

If your heart isn't set on a true 35" tire, I'm running 295/60R20 Nitto Trail Grapplers, which according to Nitto, the specs are 34.45" tall x 12.13" wide. I have a 2" level and they fit fine without trimming on stock wheels. For reference, stock wheels have a +44 offset. I only rub on the UCA at full lock.