Can anyone with programmers give me a spark advance reading. I'm trying to figure out if i'm off a tooth when I did my cam phaser on the driver side this past weekend.. want to kinda get a feel what their readings are at idle and when driving it... mine at idle bounces around at 10-15*. same at freeway speeds.. i've seen it at around 22* like if I give it gas then let off a little then even back out at around 15*

truck runs fine. no rough idle, hard to tell if there's any hesistation or lag. kinda feels a little down on the power when getting on it on the freeway but hard to tell, just happy that it's not a rattler anymore with that damn cam phaser.. trying to watch my gas mileage to see if it's gone down..

Thanks.

 

At idle mine jumps between 12-16* and when I get on it about 3/4 throttle it gets up around 35-38*. I have the Edge Evo on "tow setting" but I'm not sure how much timing is advanced on that setting compared to stock.

 

Awesome thanks for the reply. I'm getting the same reading then on my gryphon setting. I had changed out the driver side cam phaser and thought maybe it had jumped a tooth but it's idling and driving fine and before ripping everything back apart first thought I'd ask what everyone has been getting for a spark reading.