2004 - 2008 F-150
Sponsored by:
Sponsored by: Real Truck

Auburn Gear ECTED positraction and Locker for Ford 8.8"

Thread Tools
 
Search this Thread
 
Old May 31, 2012 | 02:23 PM
  #1  
TPAYNE's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2011
Posts: 141
Likes: 0
From: san luis obispo, CA
Auburn Gear ECTED positraction and Locker for Ford 8.8"

Anyone running one of these? Seems like a pretty nice option and don't have to run air lines because it's an electric locker. Here's a link:

http://www.ringpinion.com/b2c/Produc...rce=DiffWizard
 
Reply
Old May 31, 2012 | 03:38 PM
  #2  
Gordon M.'s Avatar
Senior Member
Joined: Apr 2003
Posts: 234
Likes: 0
From: Jax.Florida
Join up @ www.jeepforum.com & Post or search in the TJ section,There are quite a few Jeep owners running Ford Explorer 8.8 axles & likely some will have good input on the ECTED
 
Reply
Old May 31, 2012 | 03:55 PM
  #3  
TPAYNE's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2011
Posts: 141
Likes: 0
From: san luis obispo, CA
Originally Posted by Gordon M.
Join up @ www.jeepforum.com & Post or search in the TJ section,There are quite a few Jeep owners running Ford Explorer 8.8 axles & likely some will have good input on the ECTED
ok cool, thanks i'll have to check that out. leaning more towards the eaton e locker after doing a little reading now though. no clutch to wear out and i like the feel of an open diff when driving on street compared to a posi like the auburn.
 
Reply




All times are GMT -4. The time now is 03:25 PM.