A couple new upgrades
Senior Member
Joined: Sep 2006
Posts: 1,879
Likes: 0
From: Virginia Beach
Thanks guys! Yes I did paint them. I taped off the lettering and cut a clean edge with an xacto knife. Sanded them down a little bit and hit them with adhesion promoter and paint them the color of your choose. It took a lot of time and patience especially with the little FX4 letters, but well worth the results!
Thread Starter
|
Senior Member
Joined: Jun 2007
Posts: 488
Likes: 0
From: Allen, OK
I bought mine from Tasca Ford by phone, it cost me $104 shipped. The part numbers for the emblems are:
9L3Z-9942528-E - 09 F150 Flareside Tailgate badge
9L3Z-16720-D - 09 F150/FX4 Emblem - RH Fender
9L3Z-16720-DB - 09 F150/FX4 Emblem - LH Fender
They have ones that say XL, XLT & Lariat as well. Make sure you get the flareside tailgate emblem because the styleside is not flat on the back. Good luck!
9L3Z-9942528-E - 09 F150 Flareside Tailgate badge
9L3Z-16720-D - 09 F150/FX4 Emblem - RH Fender
9L3Z-16720-DB - 09 F150/FX4 Emblem - LH Fender
They have ones that say XL, XLT & Lariat as well. Make sure you get the flareside tailgate emblem because the styleside is not flat on the back. Good luck!
I'd go with the Mickey Thompsons also.
Thread Starter
|
Senior Member
Joined: Jun 2007
Posts: 488
Likes: 0
From: Allen, OK
Thanks guys!
Well unfortunately my wifes Jeep Grand Cherokee pretty much bit the dust yesterday (terrible low end knock, caused by a bad wrist pin). So it's time to by a new car and longer wait for wheels and tires...
Well unfortunately my wifes Jeep Grand Cherokee pretty much bit the dust yesterday (terrible low end knock, caused by a bad wrist pin). So it's time to by a new car and longer wait for wheels and tires...