2004 - 2008 F-150
Sponsored by:
Sponsored by: Real Truck

how to change push button bulbs

Old Jul 5, 2011 | 02:26 AM
  #1  
fsulaxer's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 237
Likes: 0
how to change push button bulbs

Trying to figure out how to change the push button map light bulbs, mine blew out and need to replace them have no clue
 
Reply
Old Jul 5, 2011 | 10:05 AM
  #2  
Brad Johnson's Avatar
Senior Member
Joined: Jan 2010
Posts: 324
Likes: 0
From: Lubbock, TX
You remove the entire shroud to expose the bulbs. It's held on with friction clips. Get your fingers under a corner and put gentle pressure on it until it pops off.

Brad
 
Reply
Old Jul 5, 2011 | 11:50 AM
  #3  
BIG DOG D's Avatar
Member
Joined: May 2011
Posts: 91
Likes: 0
Yup my 05 has clips holding it in. Just pull down with even pressure on one corner and work your way around.
 
Reply
Old Jul 5, 2011 | 11:02 PM
  #4  
Fox Fader's Avatar
Senior Member
Joined: Feb 2011
Posts: 146
Likes: 0
From: Columbus, GA
The right way...

In the driver's seat, with your right hand underhanded, place your fingers under the very front of the map light trim and pull the front down. It will come right out with no damage.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:57 PM.