So, I recently got some parts that I have been wanting for sometime now... I just picked up a Street Scene wiper cowl, and a Street Scene grille with the driving lights built in. I have been reading and havent seen a bunch of guys with these grilles. Can anyone tell me or show me how they ran the wires for the lights. I will keep you posted when I start the install and hope to post some pics as it goes.

Any help would be great.

 

it depends on how/when you want the light to run. if you want to run them with the headlights, just wire them into the the headlights, if you want them to run with the hi beams wire them into the hi beam wire. if you want them to run with fog lights, again wire them into fog light wire, thats how i ran my fog lights on my ranger; wired them in with my headlights. they ran fine til i took them out.

if you want them on all the time i believe you have to run a relay into a battery on line, i believe. im not a wire guru by any means. but im really curious as to how the cowel comes out, i might need to get one of those, the rubber on the sides of my stock one are starting to crack away from the sun.

 

If you could explain to me in what situations you want them to run I can explain to you how to run. It just depends on how you want them wired.

For example, I have my lights wired to a 3-position toggle switch.

Up = on
Mid = off
Down = On with High Beams