Is there a separate fuse for the passenger side window on my 06 SCREW? The driver side cluster will run the pass side window. I replaced the pass side switch and still nothing. I check for power at the harness plug that goes to the switch and seems no power is getting to the switch. This leads me to think its a fuse. In the manual they only show the 30 amp breaker for the windows. No other fuse is listed? There has to be a separate fuse for that side? If so can anyone enlighten me?

Thanks

 

is there an issue with the switch on the drivers door thats locks out power to that switch? Do your rear windows operate normally?
Also give the connector a good push where the passenger door meets the body. Sometimes these loosen.

 

The driver side switch actually routes the power for all the windows. Get a buddies truck and switch driver door switches.

 

OMG! I am officially stupid! My dad drive this truck all the time so I'm going to try and pass the blame to him. The lock out switch was on for the windows! It never occurred to me to check that. I was trying to figure out how to delete this thread before some one answered, but you guys are too fast! LOL!

 

 

Wow, Thanks! Even Jesus! Oh the shame. LOL :o

 

This group doesn't miss much, so you had no chance to start with.

But think of it from this perspective, that was a true one click fix.... and free too....