Well, I pulled into the garage just now and rolled the driver's front window up and POP!! So I guess ya'll know what I'm doing this weekend. What's ironic is that I was just looking at one of those threads yesterday. I'll do a search of course but if anyone has any tips they would be appreciated. Thanks!

 

Yeah I just posted a tech article on this yesterday! Let me know how it goes for you if you use it. If the pics don't show up let me know and Ill get them to you. They are in a public folder now in my albums if that helps.

 

Yes, there are two good threads on the subject in the Articles and How To section.

 

JDB, your's was the thread I was reading yesterday. Good work! I'll definitely be using that. I'm kinda bummed about not being able to just replace the clips. Oh well. It gives me a reason to work on my truck!

 

I had to figure out how to get the door panel off at 9:30 at night to wedge something under the glass because it was about to rain, no instructions... took me forever. Once that was off and I had the new window reg it took me all of 20-30 minutes to install it, super easy.

 

I had good luck with a piece of 1x2 cut the the right length... I had to drive around for about a week while I waited for parts.

I could just pop the board out to let the window open so I could swipe through the security gate at work... then just push the window up and put the board back in.

 

Thanks to JDB04F150! I had to rig the window with some wood for a few days but I got my new regulator/motor assembly in today. I did nick my tint even though I was carefull. Aside from the new unit being wired backwards and having to rewire it everything went well. Thanks for the help! I love this forum!