After seeing some pictures from a forum I decide to upgrade to Towing Mirrors, they look very nice. This is my problem, I opened the door panel and checked the connector, for my surprise just 4 wires, (2 y, 1 black, 1 D. blue), to have the turn signals, heated mirrors and puddle lights I need more wires than that (I think). I am looking for the diagram (pics)to find out where to connect new wires, please. Thanks (my first time on this forum):confused:
this is my email - emersonroberto@hotmail.com

2006 F150 XLT - 7 Lug rims(can't find good wheels) 8' Bed - 5.4 - Super Cab

this is the link for the connector pic
http://i792.photobucket.com/albums/y...a/P1150005.jpg

 

my truck came with tow mirrors and I downgraded to the regular mirrors. The drivers side works but the pin out of the connector on the passenger side is different.

 

I haven't opened the passenger side yet, but I will to check the connector. I tow a trailer and Towing Mirrors will help.

 

I have an 05 that had the power, heat and signal in the mirror and I just had to move one pin to make everything work. I also added a clearance light/turn signal to the outside of the mirror so it can be better seen at night and from the front.

 

^^ oh man if that is all, please tell me which one and I owe you a few beers.

 

Check out this thread

https://www.f150online.com/forums/20...-new-post.html

Or you can go to Tascafordparts.com scroll down the page about 1/2 way and click on F150 mirror retrofit and there is a list of wiring diagrams

 

So I found the pin outs, and am kinda confused. I have a 2007, so does that mean the mirrors I have (small ones that dont work) are probably 2005-2006?

I also assume that this refers to the internal clip (meaning the one on the wiring harness) not the one on the mirror.

 

Thanks MKinttrin I will check that. The white truck is very nice, I like the chrome mirrors