my bumper was really crappy, so I bought a used one. The new bumper has fog lights. Ive read in forums that a universal harness was used by Ford. My headlight switch pulls out when you have the headlights on. So this means I should be able to wire the new fog lights to the headlight harness.

I dont know what colors or where to start. I tried taking out the headlight, using the two pull up levers, and the left light rubber alignment things came off the rails, and I cant get the other side out to re-allign into the proper upper and lower slots. Not a big deal, but I dont want to blind people if the headlight is to the left.

Anyway, if someone can tell a newby geek how to do this job (fog lights) I would appreciate it very much.

ctguy1955@yahoo.com is my email. Thanks in advance.