I lost my AC clutch while driving down the road!!! A couple days ago i went to turn on my ac and it was blowing hot air so i thought that i had leaked off some coolent, so to day i went to recharge it with a kit from auto zone and when i poped the hood and looked in the out side clutch cover that attaches the pulley to the shaft was laying on the frame rail. Today I went to Ford to see what kind of bolt was needed to reattach the clutch and discovered i lost a couple of spacers and it seems like a bearing also, this is a list that I had to have
1 bearing @ $50.00
3 spacers @ $19.99 each
1 bolt that comes in a pack of 4 @ $7.00

does any body have a diagram of how the clutch goes back together?

 

man that sucks. I'd go for a test drive and just pop the hood on a new one and see how it goes back together.

 

Hope this diagram helps....

The assembly is (7) Clutch (8) Pulley (9) Coil (6) Compressor.

 

Check the compressor before you replace the clutch. Frequently, the clutch fails because the compressor locks up. You might need both. You can buy a rebuilt or used assembly and replace the entire unit.