Does anyone know if this link's instructions still apply to the new models? I'm wanting to do the exact same thing. But I want to make sure these instructions will work for the new models.

http://www.fordf150.net/howto/tailgateemblem.php

If not, can anyone give me some pointers? Like I said above, I'm looking to do the exact same thing as that link. I ordered a new side emblem that says "5.4 Triton" below the F-150 emblem and replace the standard tailgate emblem with it.

 

yes i believe it does

 

Ok, thanks. If anyone else has any tips, please let me know.

 

I followed this link and it worked perfect no marks scratches it always helps when someone gives super instructions here is what i did the truck cannot be ID has a ford or any other brand at first glance

 

Except for the fact that it's a huge honkin' F-150!

I also covered/replaced anything that said Ford...





- NCSU

 

HaHa I got ya big f-150 I go to the us nationals every years since i was 15 now 55 alot of trips so i did the emblem change to be unique and different and since its a oval hey maybe they think nhra is a vehicle mfg.

 

I have edge performance badges. Does anyone have a pic of the holes in relation to the badge size? Or a pic of the back of their old badges? I need to find out if my Edge Performance emblems will cover both holes and nobody was able to help when I posted a thread.

 

iirc the holes (or the pegs on the badges) are about 1", maybe 2" in from either edge. Don't quote me on that though... How big are the Edge emblems?

- NCSU

 

4.75 x 2.25 inches

https://www.f150online.com/forums/sh...d.php?t=322184

 

hmmm, that's gonna be close. From what I remember of the pattern of the pegs on the OEM emblem, i'd say you've got probably a 75% chance that your badge will cover the holes, but you won't have much wiggle room.

Some with a billetbadge emblem must know the answer...

- NCSU