F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   2004 - 2008 F-150 (https://www.f150online.com/forums/2004-2008-f-150-80/)
-   -   Who Has 4.10's?? What brand? (https://www.f150online.com/forums/2004-2008-f-150/328724-who-has-4-10s-what-brand.html)

Racing2Fast Apr 7, 2008 10:38 PM

Who Has 4.10's?? What brand?
 
I have a set of 4.10 Genuine Gears installed in my 04 Screw 2wd 4.6 with the 8.8 rear end.

Only have about 230miles on them so far, and they recommend a 500 mile break in period. It has a whine at about 70-80 that's pretty darn loud. They'll look at it after the break in period. Re-Order gears and try it again if they dont quiet down. Said I could pay the difference and get a different brand. That leaves me wondering who's got what, and the issues they have had with them if any.

Please list the brand of gears you have and the exp. you have had since getting them installed.

Thanks,

Hopefully this will help me decided what brand to try next if I cant get these right!!

Tom
:smoke:

RYAN24 Apr 7, 2008 11:14 PM

Ive heard good things about precision gears :D

ManualF150 Apr 7, 2008 11:42 PM

I've got Motive 4.10's in a 8.8" with a LS.

Best improvement ever... I dunno know why it didn't come from the factory with 4.10s. :smoke:

Racing2Fast Apr 8, 2008 12:02 AM

Any issues with them? They make any more noise that the stock ones?

GerRod Apr 8, 2008 12:03 AM

I have Precision Gears and haven't had any problems with them.

Whine is probably due to misalignment.

ManualF150 Apr 8, 2008 12:27 AM

No problems here.

I still don't know why these trucks are not geared higher... they'd do so much better in the gas mileage aspect stock. Not to mention the extra kick.

athill Apr 8, 2008 01:32 AM

what have you guys used to adjust your speedo for the gear change?

Tylus Apr 8, 2008 02:37 AM

Ford Racing make excellent gears

alomar Apr 8, 2008 03:10 AM

I had Precision gears in my 04 Heritage. I would say any whine would be from a bad install.

mgp32 Apr 8, 2008 01:12 PM

Would swapping gears void your warranty?

JeremyGSU Apr 8, 2008 06:44 PM

I had Precision 4.10's and they had a pretty nasty whine at 80+. I then put in Ford Racing gears, which turns out were the EXACT same thing as my Precisions. The guy pulled them out and compared them several times and said they must have come from the same plant they were manufactured at. Either way, this time when they installed them they set them to be as quiet as possible on the drive side. They both whine between 40-48mph. At 80 I still hear a slight whine but it's almost not noticeable compared to before. It's not until I hit 85 or so that it starts to whine noticably again.

This set also makes more noise when I left off the gas at 70+ than the last set but I'm done caring about this crap anymore. I just turn up the radio more.

Racing2Fast Apr 8, 2008 09:52 PM

Your issues sound exactly like mine.

40-50ish a slight whine, but 70-80 it's damn irritating. Under throttle they are quiet, let out of it or ease up and hold that speed and they'll drive you NUTTS!!!!!!!!!!!!!

It's GOT TO BE A SHOTTY INSTALL!!!!!!!!!!!!!!!!!!!!!!!!

Anyone know where I can find the spec's of a 8.8 rear end? I'd like to view the back lash settings ect..ect.. myself. Maybe quizz the guy at the shop a little and see if he knows what he's talking about. I hate being ignorant in this department and just having to accept what they tell me. They are Pro's, but Pro's at what Im unsure of. Looking more and more like Pro's at BS'ing, and Blowing Smoke!!

djh1121 Apr 9, 2008 09:03 AM

Some 4:10's made in the US by Ford Racing are in the fox. (The ones not made in the US are junk, pure junk...)

crash_lucky13 Apr 9, 2008 09:36 AM

mine have the whine also... go figure....

it PROBABLY whines at 80.. but i never stay at 80 long enough to find out :)

tnsilverfx4 Apr 9, 2008 09:42 AM

i read somewhere on here that ford changed the backlash specs after 04


All times are GMT -4. The time now is 11:17 PM.


© 2026 MH Sub I, LLC dba Internet Brands