|
12's on 23's!!! 12.93!!
We went a 12.939@106 mph in the Saleen Truck last weekend at Fun Ford New Hampshire. The truck was running its everyday street/tow tune on 93 octane. This was done at a weight of 5800+lbs!! The truck dynoed around 460 just before we left for the race.
Here is a video, it shows the first round of street renegade cars first then it has the truck class, its almost the last couple of seconds of the video so it might be long before it gets there. http://ywnv.vidiac.com/recentvideos/...92013f32c2.htm Here is a cool one that was taken as we were packing up to leave!! http://ywnv.vidiac.com/recentvideos/...94012d4af4.htm JimIII@JDM |
Sweet, what was the temp out?
|
Originally Posted by nuclearthreat54
Sweet, what was the temp out?
70's w/ about 30 % humidity. It was good air compaired to what we have been seeing all season so far. We normally go 13.0's-13.20's depending on the track, in Bristol TN we went only 13.50's!! Ill bet in good air this year it sees 12.60's or better. JimIII |
very nice :thumbsup:
|
What all has been done to that thing to make that kind of RWHP.....what psi is it pushing?
|
Who does that? Haha a burnout with a trailer on :lol:
|
That thing is nasty. :rocker:
|
Originally Posted by Matt 05'FX4
What all has been done to that thing to make that kind of RWHP.....what psi is it pushing?
|
I would also like to know the boost numbers on this truck as well......nice time too :thumbsup:
|
Second video was pretty funny
|
The 2nd video was just playing around showing what a tow, show, and go truck this really is!
Well the truck has been modified from what it came from Saleen with but this is the mod list... Saleen Supercharger Xcal2 JDM tuned JDM air kit 3.00 upper/10% lower pulley = 12.5 psi with full exhaust JDM Electric fan Afco heat exchanger 4.56 Gears Longtube headers and high flow catted mids with JDM catback JDM Valve body JDM Traction bars JimIII |
The second vid is the best. :thumbsup: :lol: . Leaving a dark sticky burnout with a double axle car trailer, with a mustang on the trailer.:lol:
|
Originally Posted by JimIII@jdm
The 2nd video was just playing around showing what a tow, show, and go truck this really is!
Well the truck has been modified from what it came from Saleen with but this is the mod list... Saleen Supercharger Xcal2 JDM tuned JDM air kit 3.00 upper/10% lower pulley = 12.5 psi with full exhaust JDM Electric fan Afco heat exchanger 4.56 Gears Longtube headers and high flow catted mids with JDM catback JDM Valve body JDM Traction bars JimIII |
Originally Posted by '06STX
What have you done after you got the truck from the Saleen factory?
JDM - beautiful truck :thumbsup: :beers: bubba |
Originally Posted by JimIII@jdm
The 2nd video was just playing around showing what a tow, show, and go truck this really is!
Well the truck has been modified from what it came from Saleen with but this is the mod list... Saleen Supercharger Xcal2 JDM tuned JDM air kit 3.00 upper/10% lower pulley = 12.5 psi with full exhaust JDM Electric fan Afco heat exchanger 4.56 Gears Longtube headers and high flow catted mids with JDM catback JDM Valve body JDM Traction bars JimIII no motor upgrades, and besides the tranny getting a valve body no other upgrades to that? if so these stock motors can handle allot! |
| All times are GMT -4. The time now is 05:48 PM. |
© 2026 MH Sub I, LLC dba Internet Brands