Just got off the phone with Rough Country, and they said with a 2.5in leveling kit and using 17x9 Classic Locks you can run a 35x12.50 with NO rubbing!!! That is the third person from there that has told me this. Anyone know if it is true. And last will a 17in wheel fit on a 06???

 

It will be close, I had 315x70x17 BFG's on my 17x9 wheels with 5" BS and they rubbed slightly on the lower wheelwells. The wheel to put them on is a 17x8 with 5 1/2" BS. The American Racing "Fuel" and "Crush" model wheels have these specs. Look at the pics in my gallery with the tight clearance with the 35's. It's hard to beat the look's of the 35's on these truck's! On your model truck you better check and see if the 17" wheels will clear the brake's.

 

yeah they'll fit I have 17X9s, I'd like to see 35s on a 2.5" lift go for it!!

 

I know it sounds like it will not work, but there are pictures on the website of this truck. I swear i will be pissed if i get them and they rub!! The guy said that there was NO rubbing at all.

 

My 33s used to rub on the lower black bumper trim corners. I trimmed them back about 1" no rub now! Could be my off set tho, just be carefull, they'll sell ya anything ya wanna hear! I don't see 35s on a 2.5" lift without rubbing. But I could be wrong! Besides, 33s are plenty big enough

 

Ordered!! 17x9 Classic Lock with 35x12.50 bfg muds from 4wheelparts.com They too also said that they would not rub!! We will have to just see

 

Now the wait will kill me!!!!