Current:

TrailFX Crossover Box
AVS VentVisors

Future:
2.5 AS/ 1.5 AAL
17x9 M/T Classic II's or **** Cepek DC-1's
P285/70R17 Bridgestone Dueler A/T REVO's Or BFG AT K/O's
Corsa Exhaust
K&N 77 Series Intake
Edge Evolution Programmer
Remove Factory Step Bars
Line-X liner
Harley Taillights
GTS headlight blackouts
Lund Interceptor PTM
PTM Door handles/tailgate handle
FX4 Seats Covers(Leather maybe)
Smoked 3rd brake light

 

Warn Transformer (Black)
Warn 9500lb winch
Some sort of light bar on top
KC Daylighters all arround
Backup Lights
Train Horn
Lights in the Bed
Newer GPS
Line-x bedliner or similar
Tint front windows.

New "faithful" wife for the passenger seat!

 

For me:

window tint
2.5 spacer
35's (nitto)
4.56 gears
Edge
bassani exhaust
e-fans
bull bar

 

So when you order these do you simply just order the LT outside door handles? If so I think I found them, but there doesn't seem to be a part number. What part number do you have?

Silver Right 2006 $42.29
Silver Left 2006 $42.29

 

I think that price is just for the actual door handle and doesnot include the painted buckets, I think. Here are the part numbers that I have, and the prices for them from discountfordparts.

Black LT passagner door handle 6L3Z-1522404-DC $50.56
Black LT drivers door w/keypad 6L3Z-1522405-DP $91.56
Black LT tailgate handle 5L3Z-9943400-AAD $26.68

 

So you're getting those prices from http://www.discountfordpartsaty2kford.com/ they are slightly cheaper on the other site you mentioned. That's where I ordered mine from today. I'm going to have to call the guy back tomorrow though because he said the LT tailgate assembly for the 2006 was all black and not the chromed handle. Lucky for you you'll get off cheaper because you don't have to purchase the two back door handles. That added another $100 to my order.

Any idea how tough is it to install the driver side with the keyless entry? Hopefully something I can tackle myself.

 

so far my truck is stock, unless you wanna call rhino liner, tinted windows, and a truck box mods, lol

Future mods...

- 4" Rancho lift
- 325x65R18 Nitto Terra Grapplers
- 18" Eagle Alloys
- Edge programmer
- Flowmaster Force II exhuast
- K&N FIPK intake
- Westin nerf bars
- billet grille


what do you guys think?

 

Current Mods:

Rize 8" lift
2" Tuff Country leveling kit
18x8.5 ultra type 185 baja champ
37x13.50x18 Toyo Open Country M/T
Cabela's Tube Steps
Edge Evolution
Hatchie Bottom Neoprene camo seat covers front and back
Hatchie Bottom Neoprene Steering Wheel Cover
Tool Box
Putco Grille Insert
camo hoodsheild, window vents, and tail light covers
flowmaster super 40 si/do
spray-in bedliner

Future Mods:

4.88 gears
grill guard/winch mount
camo fender flares
16.5 warn winch
AEM Brute Force Intake
Headache Rack
4" aal

 

Okay here goes.

Full Royal Purple Treatment. Right now I use Royal Purple motor oil. I am talking the full course treatment.
Hypertech Power Programmer III. Yeah I know it produces a couple HP less than the Edge Evolution, and doesn't have that nifty dash top display. But it DOES give a good power tuning and MPG improvement on 87 octane pump gas. Where I go even 89 octane can be hard to find sometimes.
Fram Boost CAI
Long tube headers, high flow cats (2 not 4!), Magnaflow True-X muffler, and side behind the tire exit.
Fabtech 6" lift with Coil Overs. I have been reading owner reviews, and this seems to be the best lift aside from the Rize. And something about that lift makes me nervous. Can't say what...
1 more Pro Comp 17x9 1089 wheel for a matching spare.
35x12.50/17 Maxxis Bighorns. 5. Yes I said Maxxis Bighorns. I have been doing a LOT of reading, and talking to guys in the 4x4 club. These tires get rave reviews from almost everybody. Sure you will see one or two detractors. But that is with anything. IF I cannot fit a 35 in the spare tire pocket, I have to rethink this whole thing mind you...
Detroit Truetrac front and rear gear drive limited slips. 4.56 gears.
Redo the brakes again with another set of EBC Greenstuff 6000s, but with drilled and slotted rotors this time.
Milemarker Extreme winch mount / brush guard. Either mate the side arms if they will fit from my current Hunter, or weld in the headlight protector tubes.
Milemarker 10.5K Hydraulic 2 speed winch and accessories.
Bedrug.
King Ranch bedrail and tailgate caps.
Non chromed bumpers.
EGR flares.
1 more set off road lights.
Taillight protectors.
Custom 2 tone paint scheme. Bumpers, lower strip, flares, grille, hood center, nerf bars, grille guard, and taillight protectors all painted Dark Stone. Grille insert honeycomb, door, and tailgate handles painted Airzona Beige. (Full Arizona Beige, not Mark LT with painted buckets and chrome handles) Dark Stone Pinstiping.
Hatchie Bottom shadowgrass cammo seat covers.
AM/FM/CD/DVD/MP3 deck.
In dash mounted AM/SSB 40 channel CB with power mic, roger beep, echo, and extension speaker mounted in kick panel (the one under the center of the dash).
Finally mount up my 102" whip.
RV trailer wiring and brake controller.
HD Transmission cooler.
Smoked Headlights and Taillight lenses. I think they were Hellas I was looking at.
Scotch guard the snot out of my interior.

And lastly, a loaded out Navigator for my fiancee, and the kids we will be working on making.... The '03-06 model. The '07 updates look kinda funky to me.

Now that was dreamland. What am I actually likely to do?

Maxxis Bighorn 305/70R17 Saving up for this. Probably have to do it on a 5 payday month.
TrueTracs and 4.56s. Installed with the help of an experienced friend. Put money aside for this. By end of next year hopefully.
Hypertech Power Programmer III. Tax Refund Check. This should improve MPG.
Keep on of my current 285/70R17 BFG ATs as a spare on the stock steel wheel. Cost of mounting and balancing.
EGR Flares. I see these all the time for $199.00. Put money aside for this.
Bedrug. Put money aside for this. $390.00 locally. I think I can do better.
Rework my existing AM/SSB 40 channel CB. Mount it in the lower dash pocket. No money out.
Mount the 102" on the rear bumper. No money out. Say hello to a half inch hole in the rear bumper!
Magnaflow muffler. Custom bent tubes from a friends shop. SS tip from Autozone. Shop made cat back basically. Already have the muffler. Given to me as a take out from a wreck. Pay for tube.
Dig out the set of KCs I had on my Baja Bug back in the late 80s from the garage, repaint them, put bulbs in them, mount em up and wire them in! $30.00 for bulbs and wiring harness.
Build my own HD rear bumper. I have friends that can help with this...

With all my other projects this won't happen fast. But payoff day is coming up fast, and I can dump money into mods when payoff is done!

 

I'm almost done, heres what I still need:

DGM sideskirts
OEM HD valance
OEM PTM fenderflares
Cervinis fender vents
bell tech 2" drop spindles
24's out back
285/35 22 up front 305/35 24 out back
install the system I have sitting in my room

supercharger (in my dreams)

 

I guess I'll bite. Most of this stuff is being installed about a month before I leave Iraq so when I get home, I'll be able to jump in and play.

8" Rize lift
Bilstien 5100's up front and 5150's out back
Custom Deaver leaf pack
20x10 Ultra Wheel Predators
37x13.50 Nitto Mud Grapplers
4.56 gears
Alram with remote start and the acc button wired to operate all six windows
Backup camera
Custom built powdercoated Rally Bar with 5 KC Daylighters
Custom built powdercoated diamond plate tool box
Baja style in bed spare tire mount
Adjustable hitch
Embroidered FX4 in headrests
Install K&N Intake
Electric fans

So as soon as I get back to the states and get back to the truck, I'll get some pics for ya'll and let you know anything else that I can think of.

 

how long are you to be stationed in Iraq?

Thanks For Serving This Country

 

Done:
Extang R/T Tonneau
Bedrug

Coming Soon:
JLT CAI
SCT Livewire tuned by RWTD
SISO Magnaflow
Tinted Tails
15% Tint

Maybe:
Nitrous
Stereo upgrade

 

Pacesetter Ceramic coated long tube headers- IN THE MAIL
Magnaflow High Flow Cats and Di/Do X pipe muffler- IN THE MAIL

followed by some sort of Intake either Air Force 1 or Outlaw

 

Current Mods.

Factory Match Tint
K&N Intake
Edge Evolution Tuner
Command Start
MTX Thunderform Sub box
6000k HID Fogs and Headlights
Husky Liner Floor Mats

Coming Soon.

Street Scene Speed Grill
Street Scene Bumper Valence Speed Grill
Smoked LED Third Brakelight
Pioneer AVIC-D3
Boyo Reverse Camera
PAC SWI PS(for steering wheel controls to work with aftermarket stereo)
Billet Stubby Antenna
24" Foose DF-6 Wheels
BFG G-Force 305/35R24
Remove my Silver Stripe