Ok so I get in my truck this morning and my Edge will only say Evolution and will not go to the gauge screen. I shut the truck off and take out my keys and open the door all power in the truck is out like normal but the edge still says Evolution. So I drive to work truck runs fine get to work no change with the edge. So I shut my truck off take the keys out and unplug the edge from the back and then re plug it. Put my key back in and everything is fine now. I would like to know if anyone else has had this happen to them. What could have caused this problem?

 

I'm not any help but Mine acts goofy sometime to. Yesterday On my way home my Edge displayed the info screen but non of the meters was working. All 4 boxes displayed 0, I pushed the menu button while driving and they displayed all current readings and have been fine sense. I'm not sure why it does that sometimes.