I didn't use the A-A-L on my reg cab truck. Figured it was shorter and lighter than a crew cab, so I wouldn't need it. It sits just a tad butt-low, which I prefer because it rides and pulls better. BUT, stick a 500 Arctic Cat 4x4 4 wheeler in the back and whoa baby! Boy does she sit down.....so I'll be putting the A-A-L in soon. These trucks need that. it doesn't severely hurt the ride, gives it a bit more load carrying capability, and brings up the rear just about where it needs to be. If it gives it too much, I'll just take it out and re-arch the factory spring pack. As with anything new, it takes some playing with to get it just right. As for the short(er) bed crew cabs, it works out perfect.

 

yeah and i have a shorter bed crew cab haha.....

now i just got 100 bucks from my g-ma for my birthday and i have some money so im going to do a exhaust when i can, and start saving up for some coilovers up front.

anyone know if it would be possibly to take out the coilvoers and jsut put like....2 MX-6R shocks on each wheel up front?

 

I just posted pictures of the Rize kit laid out in my album. If you want to see an assembly, go to http://www.planetradio1073.com/pages/mts.html and click on the assembly link. They don't have the pictures in the correct order, but hey, they're a radio station!

 

i would tackle the isntallation myself if i had some air tools and a lift for my truck and some time.....school starts next week.....

 

Joey

How much extra are the Bilsteins for the rear or was the price you quoted me with them? I can't really recall. . . and what do you think about adding Bilstein shocks up front, the stock length.

Thanks.

 

Absolutely not....

 

Forget the pictures of the truck.. Im looking at all of these pics...

 

why woulkdnt it be possible.....craig that has the 12" inch full throttle is running the same setup just with fox shocks??

 

I don't know man. I think I could break her in half. Just look at her arms, shoulder, and neck. . Theres only two good things about that picture and they both are fake.

 

And the best part of one is showing.....
My crystal ball says this thread will soon be deleted.


ETA: Sorry Tx150, I wasn't complaining; Just pointing out the obvious.

 

Ur wrong bud, he is actually using a spacer plus his stock ford strut and coil, and then he has 2 fox 2.0's above that...

 

well you got me....never seen that picture.....jsut some further away and alls i could see is the 2 fox shocks.....my bad

does he have a gallery on here?

 

You need shock hoops, I don't know where you can get them. I am not sure how the FTS loops would work on a Rize but it's worth a call (talk to someone knowledgeable, not the idiots who answer the phone). That is the case with Fabtech.

 

i wanna do somehting with these white body shocks but i dont know what...

 

I got an idea, throw them in the trash, cuz they prolly suck...