I have done a search for a picture of carpeted catchall front mats for a 2006 screw.That I can see almost every member has the wrong mats in his vehicle,It is confusing because catchall keeps reffering to 4x4 floor shift,and floor shift, which is in the fx4 and lariat.Lets see some pictures of catchall mats in a vehicle with 4x4 shift on the floor.I have ordered mats twice now from stylin concepts, and keystone automotive,once front and rear seperate,and once in the front rear combo pack.Both sites when ordering say ( WITHOUT 4X4 FLOORSHIFT) but when the mats come in they say vehicle (WITH 4x4 Floor Shift) which is not what I have. When I say it looks like members have the wrong Front mats what I mean is, every members gallery I have looked at has the same mats that I have ordered,that on both boxes I have, says vehicles with 4x4 floor shift only, so lets see the difference between the two front mats with 4x4 floor shift, and without. This is the Problem Catchall ( NIFFTY) has mislabaled them, both Boxes say with 4x4 floor shift. Only the one with the cutouts is correct for 4x4 shift.
https://www.f150online.com/galleries...829-154191.jpg
https://www.f150online.com/galleries...829-154190.jpg
https://www.f150online.com/galleries...829-154192.jpg
https://www.f150online.com/galleries...829-154194.jpg


It is easy to see the difference when you have them side by side, Both are the passenger side mats.Catchall has mislaballed them as both being the model you need if you have 4x4 floor shift.

 

I have catchall extreme in my 2004 screw Front and rear Check out my gallery I hope it will help

 

My box says with floor shifter and I remember specifically ordering them for no shifter. I was diappointed when I got them, the fit isn't "perfect" but pretty close so I just kept them. Couple of pics in gallery.

 

Scorpio most of the online big names have there part# mixed up, the only ones that seem to have it right is the Niffty Catchall website. There has got to be someone that has ordered the correct ones.The correct ones must ride pretty far up the hump,while the 4x4 shifter ones do not.If I am going to pay $ 200 I want the correct part.

 

I ordered the wrong ones orginally WITH floor shifter part number for TAN = 406412, Then I received the right ones WITHOUT floor shifter in TAN = 406312.

The last 2 digits specify the color, the 3 means WITHOUT shifter and the 4 is WITH. The first 3 digits specify front mats for 2004 -2006 F150's.

Here is the right mat for trucks without the floor shift - in my truck.



I have a pic of the wrong mat in there too, I can post later if you want. It was horrible....

 

Don't bother with the Catchalls. Get a set of the weathertechs. The ULTIMATE in F150 carpet protection.

 

Those are the ones I've been looking for. Where'd you buy them? All the online vendors I've found for them seem lame.

 

Straight from the source, brotha.
http://www.weathertech.com/

 

Right on. What do the rear mats look like?

 

I just got the front mats because the ones from weathertech aren't custom like the fronts. They are cut to fit. Instead I went to Wal-Mart and got the little rectangular heavy duty rubber mats for about $4 a piece. They look perfect back there.

 

Cool man. Thanks for the info!

 

dude those mats look horrible and really detract from the otherwise nice appearance of your truck......whats with that nasty flap?? and aren't the front and rears 2 different colors of grey???

 

The colors look off because of the lighting and shadows. The fronts are the exact same color as the interior. The rears are a tad bit darker, but match the carpet really well. That flap is the best part of these mats. They keep dirt and stuff from getting in that impossible to vacuum crack between the door sill and carpet. You can just brush the dirt right off the mat and out the door. And for really big messes you can wash them out with water and it just drains right out the door. I think the catchall mats look funny. I guess it's just personal preference.