Need some Help
Thread Starter
|
Senior Member
Joined: Jan 2005
Posts: 750
Likes: 0
From: Hollywood Ca
Need some Help
OK so My inner left tie rod was bad so we put a new one on today and it's gone out with only 50 miles on it. The right side is nice and tight why would my tie rod go out so fast? 
Technical Article Contributor
Joined: May 2004
Posts: 6,509
Likes: 6
From: Georgia on my mind...
Because Ford, like several other companies out there, seeks out parts from the lowest bidders. Take comfort in knowing that we've all probably got the cheapest parts Uncle Henry could find on our trucks. 
A guy I work with has an '05 Sable with 200 miles on it that needs an engine.
A guy I work with has an '05 Sable with 200 miles on it that needs an engine.
Thread Starter
|
Senior Member
Joined: Jan 2005
Posts: 750
Likes: 0
From: Hollywood Ca
Originally Posted by Quintin
Because Ford, like several other companies out there, seeks out parts from the lowest bidders. Take comfort in knowing that we've all probably got the cheapest parts Uncle Henry could find on our trucks.
A guy I work with has an '05 Sable with 200 miles on it that needs an engine.
A guy I work with has an '05 Sable with 200 miles on it that needs an engine.
lolby the way my upper ball joint just fall out when i took off the nut no need to hammer it out what is it a bad ball joint ? or just these new front end's?
Thank's John
